CC-Debugger TagConnect (TC2030) Adapter

Hello everyone,

some people already asked my how to reflash the firmware of a BLEbee. Well in order to make the BLEbee as small as possible and not wasting a 2×5 header costing $1.50 each, I decided to use the TagConnect 2030 to flash the firmware of the BLEbee.

The PCB of the adapter I created is available from OSHpark using the following link http://www.oshpark.com/shared_projects/Ff2LiKQA 

Moreover the eagle design files can be downloaded from my Hardware Tools github repository: https://github.com/michaelkroll/Hardware-Tools/tree/master/CC-Dbg-TC2030-Adapter

This is how the adapter board looks like:

The TagConnect adapter I’m using is the one illustrated in the image below:

Finally the setup with the TI CC-Debugger I’m using to flash the BLEbee looks as follows:

Hope this helps to understand how I’m flashing the BLEbee and people who are interesting in reflashing them can use the board with the TC2030 as well.

Thank you very much,

Michael.